Residential Aluminum End Posts - Punched For Fence Panel Insertion

Price:
Pricing:

* denotes required field

Color*
Welded Plate Option*
Post Cap Option*
Identify connecting fence panel's style and height*
Identify connecting fence panel's options*
     
FENCE
PANEL
HEIGHT
Posts cemented
into the ground
Posts mounted
on top of surface
  minimum
recommendation
Leaves 2 inches of
spacing at bottom
     

36"
Any Post

5 FEET LONG
Any Post

39 INCHES LONG
+ ADD Welded Plate
     
     

42"
Any Post

6 FEET LONG
Any Post

45 INCHES LONG
+ ADD Welded Plate
     
     

48"
Any Post

6 FEET LONG
Any Post

51 INCHES LONG
+ ADD Welded Plate
     
     

54"
Any Post

7 FEET LONG
Any Post

57 INCHES LONG
+ ADD Welded Plate
     
     

60"
Any Post

7 FEET LONG
2.5" x 2.5" Post

63 INCHES LONG
+ ADD Welded Plate
     
     

72"
Any Post

8 FEET LONG
2.5 x 2.5" Post

75 INCHES LONG
+ ADD Welded Plate


100% Made in the USA!

PREMIUM ALUMINUM END POSTS - RESIDENTIAL

Longer posts, for in ground post applications, should be ordered for frost line regions.  Always check local building codes in your jurisdiction.  *provides a 2 inches of clearance after installation.  This post will not work in conjunction with other brands of fencing.  Residential End Posts connect to the Residential Aluminum Fence Panel Style of your choosing.  The factory pre-punched holes will match up to whichever residential fence style in regards to panel height, panel rail location and the number of horizontal rails on your specific fence panel.  The Residential End Post is used at the beginning or end of a fence run and only connects to one fence panel.  This post can be ordered for in-ground installations or applications where you need to surface mount the post on top of an existing, hard surface like wood, brick, or a cement surface.  Anchor bolts for the welded plate will need to purchased locally.  Do not use this post for angles or heavy racked panels.  Instead order blank, non-punched posts along with horizontal or vertical swivel mounts, respectively.  See Accessories for Fence Panels.
 

End Posts allow you to insert 1 fence panel into one side of the post to start of end a fence run.  You can also insert the panel slightly off to make a slight angular connection.  End Posts are prepunched based upon your, chosen greatfence fence panel (style, height....etc.)  Simply insert the rails of your GreatFence aluminum fence panel into the prepunched hole, turn the panel 8 - 10 degrees, then set the panel-to-post connection with stainless steel, self tapping screws included with your order.  For all other angular connections, shop:  Angle Posts and Swivel Mounts

Mounts are not required or needed to connect aluminum fence panels to end posts.

Helpful Hints: Installing welded plated posts and in ground posts

Residential End Posts are punched on 1 of the 4 sides of the post

SOLAR POST LIGHTS

Post Ball Caps

100% MADE IN THE USA USING ONLY AMERICAN MADE COMPONENTS AND EXTRUSIONS

Lifetime warranty on workmanship, materials and paint finish guaranteed not to crack, peel, blister or rust!!

Aluminum Fence Rail Strength Test
Aluminum Fence & Gate UV Test
 

Residential

Commercial

Industrial

 
4'  5'  6'  7'
Trim-to-Fit on site
5'  6'  7'  8' 
Trim-to-Fit on site
6'  7'  8'
Trim-to-Fit on site
36" 42" 48"
54" 60" 72"
36" 42" 48"
54" 60" 72"
4' 5' 6' 7'
8' 9' 10'
up to 6' Wide up to 8' Wide up to 14' Wide
up to 12' Wide up to 16' Wide up to 28' Wide
up to 12' Wide up to 16' Wide up to 28' Wide
n/a n/a up to 50' Wide
n/a n/a up to 28' Wide
5/8" sq. x .050" 3/4" sq. x .055" 1" sq. x .062"
1" x 1 1/8"

Side Wall = .082" (thick)
Top Wall = .062" (thick)
1 1/4" x 1 3/8"

Side Wall = .088" (thick)
Top Wall = .065" (thick)
1 5/8" x 1 5/8"

Side Wall = .100" (thick)
Top Wall = .170" (thick)
3 13/16"
between pickets
3 5/8"
between pickets
3 11/16"
between pickets
3 3/4"
between pickets
3 3/4"
between pickets
4"
between pickets
1 5/8"
between pickets
1 1/2"
between pickets
1.5"
between pickets
2" 2" 2.5"
5 semi-gloss
4 satin-flat
5 semi-gloss
4 satin-flat
5 semi-gloss
4 satin-flat
Unlike many other brands, we do not use any Chinese components or extrusions
100% Made in the United States of America
Lifetime warranty on materials and paint finish, guaranteed not to rust!

6005 T5 - 35,000 psi

Texas Tech Fencing - Lubbock Texas
9 premium powdercoat colors to choose from!
9 premium powdercoat colors to choose from!
9 premium powdercoat colors to choose from!

Hello There

Shipping Info