100% Made in the USA
Toggle Mobile
  1. Home
  2. Knowledge Base
  3. Diagrams
  4. Post Configuration
  1. Home
  2. Knowledge Base
  3. Products
  4. Posts
  5. Post Configuration
  1. Home
  2. Knowledge Base
  3. Installation
  4. Post Configuration
  1. Home
  2. Knowledge Base
  3. Measuring
  4. Post Configuration

For surface mount applications, your posts should be 3 inches longer than the height of your panel / gate. This will leave approximately 2 inches of clearance (space) between the bottom of the panel / gate.. and the ground. For stair-stepping applications, order longer, blank posts, based upon the rise/fall of your hill or slope. Blank posts can easily be trimmed on-site after installation. (punched posts cannot).

Cemented In Ground vs Welded Plate

Post Configuration - Cemented In Ground
Post Configuration – Cemented In Ground
Post Configuration - Welded Plate
Post Configuration – Welded Plate
Post Configuration - Welded Plate with Cover
Post Configuration – Welded Plate with Cover

Post Charts

Was this article helpful?

Related Articles