Single Aluminum Gates
GATE WIDTHS ARE NOT ACTUAL. Gate WIDTHS are the opening measurement from inside to inside of 2 Gate Posts. Deductions are made at the factory based upon your chosen gate hinges and gate lock.
NOTE: STEEL POSTS ARE REQUIRED FOR ANY ALUMINUM SINGLE GATE 9 FEET WIDE OR WIDER.
Gate Posts Sold Separately.
It’s o.k. to match residential fencing with commercial gates or industrial gates. This is common for homeowners with large driveways.
We carry matching walk gates and single swing gates for every aluminum fence panel style.
All aluminum gate widths include and accommodate the spacing for hinges and the lock.
Ex. a 48 inch wide gate will fit within a 48 inch wide opening… from inside to inside of two gate posts. Spacing is subtracted at the factory, based upon your chosen, hinges. i.e. more spacing is deducted for the Heavy Duty Gate Hinge (used on wider gates) than the spacing needed for self closing hinges.
The Sunburst Arch option adds height to the height selection, as you move towards the middle of the gate. Arch height varies based upon the width of your gate. Wider gates have taller arches.
All gates are custom, made to order, by hand with stainless steel powder coated screws. Then, framed and welded at every picket-to-rail connection.
Gate Designs For Every Need
Gate Post Sold Separately
Not only is there a fence design for everyone, but there is a gate design for every property. From family homes and apartment buildings to industrial centers, schools and parking lots, aluminum gates can be designed to handle it all. Residential gates at 6ft high include an additional, 4th horizontal rail near the bottom rail. Industrial gates 7ft, 8ft, 9ft and 10 ft high include an additional, 4th horizontal rail near the bottom rail.