Industrial Aluminum Fence Panel - STYLE 5 (*TRIM-TO-FIT)

Pricing per panel (posts sold separately):

* denotes required field

Fence Panel Color*
Exposed vertical pickets (top)*
Panel Terrain Configuration*
Rings / Circles Option*
Dog Panel / Short Pickets (+ 1 extra rail) Option*
Dog Panel / Short Pickets - Picket Top Options*
Step 2:  Order Posts, Mounts or both
2 1/2 week lead time for fabrication, powder coating, packaging and truck loading.  Shipping times vary.
Industrial Bronze Aluminum Fencing - Style 5
Industrial Aluminum Fence Panel - Style 5
Premium 2604-5 Powder Coat - Never Re-Paint!
100% Made in the USA

Rust Free, Lifetime Warranty

Heavy Duty, for high security

4 optional picket tops to choose from

Spacing b/t pickets w/o rings = 3 11/16"

Spacing b/t pickets with rings = 4"

Designed for easy installation

Panels ship to your home anywhere in the USA

Rust Free - Never Re-paint!

Posts purchased separately

Rackable on-site for hills and stairs

Panels (rails) insert into pre-punched posts

Spacing b/t dog panel pickets = 1 1/2"

Mounts purchased separately

Matching single swing gates are available Matching double swing gates are available
100% Made in the USA!

Do not commit to all of your post holes in advance of receiving your products.  Fence Panels are inserted and "set" within each pre-punched post so posts add very little distance, if any, to your run measurement.  The data below is approximate.  We recommend rounding up your footage measurements.  Fence Panels can easily be trimmed (the width) on-site.  Let's say you have a 23 foot straight run.  Order four - 6 foot wide fence panels and then you can trim a foot off one of them on-site or you can trim 3 inches off of all 4 panels.  NOTE:  The following does not apply to fence panels with rings of distinction added or panels installed with mounts.
6' wide 71 1/2 inches 2.5" x 2.5" 72 inches 14
6' wide 71 1/2 inches 3" x 3" 72 1/2 inches 14
6' wide 71 1/2 inches 4" x 4" 73 1/2 inches 14
8' wide 100 inches 2.5" x 2.5" 101 inches 20
8' wide 100 inches 3" x 3" 101 1/2 inches 20
8' wide 100 inches 4" x 4" 102 1/2 inches 20

Industrial Aluminum Fencing - Style 5 - Concave Pickets

* One of the many benefits of the design of our industrial aluminum fence panels is the ability to trim or cut the panel WIDTHS  on-site.  We call it:  'TRIM TO FIT'.  Using any hacksaw or metal blade saw, you can easily cut off 2 inches or 2 feet to complete any fence run measurement.  You can cut a panel width in half, into thirds... even into fourths.  This will also allow you to 'fill in' small areas within the boundary of your new perimeter fencing.  Remember, when cutting or trimming our fence panels, you're essentially cutting the horizontal rails.  And, those cuts will either be hidden within our punched posts or inside our straight, horizontal or vertical mounts.  Gates can never be modified on-site.  Gates are framed and welded at every picket-to-rail connection for strength, durability and longevity.  However gates, unlike fence panels, are hand built-to-order and can be fabricated to fit any opening up to 30 feet wide.  See:  Custom Width Gates

** Most fence and gate orders ship in approximately 3 1/2 weeks.  This is a close estimate because our production workflow fluctuates from week to week.  Our factory is closed on all national holidays; therefore, those days are not counted.  Smaller orders for accessories and posts only ship faster.  Larger orders for arbors, hand railing, slide gates, custom orders, privacy fencing/gates and very large gates typically require an extra week or longer.  Orders of five fence panels or less are shipped unassembled.  All other fence / gate orders ship fully assembled, boxed, shrink-wrapped and palletized via LTL freight.  For businesses with a forklift, you can easily pull the pallets directly off the truck.  If not, similar to home deliveries, you simply tear open the shrink wrap and pull the boxes off the truck.  Truck drivers are not responsible for unloading the truck -- we recommend having at least one person with you on the day of delivery.  All shipments are fully insured provided you notate, if applicable, any visible damage on the delivery receipt.  Small orders for single gates 5 foot high or higher trigger a higher flat rate shipping fee from the carrier because LTL Freight now charges by DENSITY meaning how much room you're NOT taking on the truck.  Better value shipping rates are provided with more items ordered.  Shipping is not a profit center for GREATFENCE and we strive to provide the best rates possible to our customers.  Pricing subject to change without notice.

Aluminum Fence Rail Strength Test
Aluminum Fence & Gate UV Test




4'  5'  6'  7'
Trim-to-Fit on site
5'  6'  7'  8' 
Trim-to-Fit on site
6'  7'  8'
Trim-to-Fit on site
36" 42" 48"
54" 60" 72"
36" 42" 48"
54" 60" 72"
4' 5' 6' 7'
8' 9' 10'
up to 6' Wide up to 8' Wide up to 14' Wide
up to 12' Wide up to 16' Wide up to 28' Wide
up to 12' Wide up to 16' Wide up to 28' Wide
n/a n/a up to 50' Wide
n/a n/a up to 28' Wide
5/8" sq. x .050" 3/4" sq. x .055" 1" sq. x .062"
1" x 1 1/8"

Side Wall = .082" (thick)
Top Wall = .062" (thick)
1 1/4" x 1 3/8"

Side Wall = .088" (thick)
Top Wall = .065" (thick)
1 5/8" x 1 5/8"

Side Wall = .100" (thick)
Top Wall = .170" (thick)
3 13/16"
between pickets
3 5/8"
between pickets
3 11/16"
between pickets
3 3/4"
between pickets
3 3/4"
between pickets
between pickets
1 5/8"
between pickets
1 1/2"
between pickets
between pickets
2" 2" 2.5"
5 semi-gloss
4 satin-flat
5 semi-gloss
4 satin-flat
5 semi-gloss
4 satin-flat
Unlike many other brands, we do not use any Chinese components or extrusions
100% Made in the United States of America
Lifetime warranty on materials and paint finish, guaranteed not to rust!

6005 T5 - 35,000 psi

Texas Tech Fencing - Lubbock Texas
9 premium powdercoat colors to choose from!
9 premium powdercoat colors to choose from!
9 premium powdercoat colors to choose from!

Hello There

Shipping Info