Aluminum Fence Panel without Rings
On Center Spacing Chart

Do not commit to all of your post holes in advance of receiving your products.  Both ends of each fence panel are inserted and "set" within each post so you gain very little, if any, distance in your fence runs with each post.  The measurements below are approximate.  We strongly recommended that you round up your fence run footage measurements to the next foot.  Fence panels can easily be trimmed (the width) on-site.  Let's say you have a 23-foot straight run.  Order four 6-foot wide fence panels and then you can trim a foot off one of them on-site, or you can trim 3 inches off of all 4 panels.  NOTE:  The following does not apply to fence panels with rings / circles added to them because it changes the spacing between the vertical pickets... and the on-center spacing. 

POOL FENCE WARNING:  Be careful when using this chart if you're fencing is going around a swimming pool.  Most jurisdictions (not all) in the USA require that you have LESS THAN 4 INCHES of spacing between the vertical pickets.  This means that you may have to trim some of the fence panels, at each end, on-site (easy to do).  However, you need to make sure you have enough length in your fence panels so that if you need to trim the panel at each end, to have less than 4 inches, that you have enough product to do so.

           
GRADE WIDTH ACTUAL WIDTH POST *ON CENTER PICKETS
Styles 1 - 6, 9. 10 / 7 & 8




Residential
         
5' wide 63 inches 2" x 2" 63 3/4 inches 13 /26
5' wide 63 inches 2.5" x 2.5" 64 1/4 inches 13 /26
         
6' wide 72 inches 2" x 2" 72 1/2 inches 15 / 30
6' wide 72 inches 2.5" x 2.5" 73 inches 15 / 30
         
7' wide 85 3/8 inches 2" x 2" 85 7/8 inches 18 / 36
7' wide 85 3/8 inches 2.5" x 2.5" 86 3/8 inches 18 / 36
 





Commercial
6' wide 72 inches 2" x 2" 72 1/2 inches 15 / 30
6' wide 72 inches 2.5" x 2.5" 73 inches 15 / 30
6' wide 72 inches 3" x 3" 73 1/2 inches 15 / 30
         
7' wide 85 3/8 inches 2" x 2" 85 7/8 inches 18 / 36
7' wide 85 3/8 inches 2.5" x 2.5" 86 3/8 inches 18 / 36
7' wide 85 3/8 inches 3" x 3" 86 7/8 inches 18 / 36
         
8' wide 98 3/4 inches 2" x 2" 99 1/4 inches 21 / 42
8' wide 98 3/4 inches 2.5" x 2.5" 99 3/4 inches 21 / 42
8' wide 98 3/4 inches 3" x 3" 100 1/4 inches 21 / 42
 






INDUSTRIAL
6' wide 71 1/2 inches 2.5" x 2.5" 72 inches 14 / 28
6' wide 71 1/2 inches 3" x 3" 72 1/2 inches 14 / 28
6' wide 71 1/2 inches 4" x 4" 73 1/2 inches 14 / 28
         
7' wide 85 3/8 inches 2.5" x 2.5" 86 3/8 inches 18 / 36
7' wide 85 3/8 inches 3" x 3" 86 7/8 inches 18 / 36
7' wide 85 3/8 inches 4" x 4" 87 7/8 inches 18 / 36
         
8' wide 100 inches 2.5" x 2.5" 101 inches 20 / 40
8' wide 100 inches 3" x 3" 101 1/2 inches 20 / 40
8' wide 100 inches 4" x 4" 102 1/2 inches 20 / 40

 

*These are approximate measurements and to only be used as a guide.  Margin of error ± 1/2 inch.